English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 17666
    PULSAR® PWB 52V/1.15A Enclosed Buffer Switch Mode POE PSU [PWB-52V1A]
    PULSAR® PWB 52V/1.15A Enclosed Buffer Switch Mode POE PSU
    Ref.: PWB-52V1A
    Switch mode buffer power supply units PWB are intended for continuous power supply to devices that require stabilised voltage of 52 V (e.g. PoE power systems, PoE switches). Built-in DC/DC converter allows to reduce costsof installation by reducing number of required batteries. Additional advantage is output voltage stabilisation regardless of battery charge status. Power supply: ~200 - 240 V. Power supply output: 1.15A/52VDC. Efficiency: 83%. Dimensions: 200 x 120 x 48 [+/-2 mm]. Protections: SCP, OLP, OVP, UVP.
    V.A.T. included
    Consult
    PULSAR® Recorder Straps [ZPR]
    PULSAR® Recorder Straps
    Ref.: ZPR
    Set of two straps for mounting recorder. Dimensions: 1200 x 20 [+/-2 mm].
    V.A.T. included
    Consult
    PULSAR® Relay Module [MPSBS]
    PULSAR® Relay Module
    Ref.: MPSBS
    Relay module of the PSBS technical outputs. 66.5 x 39.5 x 18 mm, intended to PSBS series. Output: 13.8 / 27.6VDC (Blue Power).
    V.A.T. included
    Consult
    PULSAR® RS485-ETHERNET Interface [INTRE-C]
    PULSAR® RS485-ETHERNET Interface
    Ref.: INTRE-C
    Intended use: The RS485-ETHERNET interface is a device intended for converting signals between the RS485 bus and the Ethernet network and dedicated for working with power supply units of the EN54C-LCD group connected to LAN/WAN network. To work correctly, the device requires external power supply within the range of 10÷30V DC e.g. drawn from a PSU of the PSBEN / EN54 series. The physical connection is safe due to embeded galvanic isolation. The device is mounted in a hermetic enclosure that protects it against adverse environmental conditions. Power supply: 10÷30VDC. TTL transmission’s speed: 115200 bauds, with parity check. LAN transmission’s speed: 10/100Mbps (auto-negotation). Dimensions: 121 x 81 x 60 [mm]. Works with the PowerSecurity programming software. Embedded web server for configuration.
    V.A.T. included
    Consult
    PULSAR® RS485-ETHERNET Interface [INTRE]
    PULSAR® RS485-ETHERNET Interface
    Ref.: INTRE
    Intended use: The RS485-ETHERNET interface is a device intended for converting signals between the RS485 bus and the Ethernet network and dedicated for working with power supply units of the PSBEN (Black Power) / EN54 (Red Power) group connected to LAN/WAN network. To work correctly, the device requires external power supply within the range of 10÷30V DC e.g. drawn from a PSU of the PSBEN / EN54 series. The physical connection is safe due to embeded galvanic isolation. The device is mounted in a hermetic enclosure that protects it against adverse environmental conditions. Power supply: 10÷30VDC. TTL transmission’s speed: 115200 bauds, with parity check. LAN transmission’s speed: 10/100Mbps (auto-negotation). Dimensions: 121 x 81 x 60 [mm]. Works with the PowerSecurity programming software. Embedded web server for configuration.
    V.A.T. included
    Consult
    PULSAR® RS485-TTL Interface [INTR-C]
    PULSAR® RS485-TTL Interface
    Ref.: INTR-C
    Intended use: The RS485-TTL ”INTR” interface enables connecting of the PSU of the EN54C-LCD series to the RS485 bus remaining galvanic isolation. The communication in the RS485 bus is due to a two-way channel, differential in a half-duplex system where transmitting and receiving data is alternate. Power supply: 5V DC (max.30mA). Transmission’s speed: Max. 115200 bauds, with parity check. Dimensions: 63 x 50 x 20 [mm]. Warranty: 5 years form the date of production. Works with the PowerSecurity programming software.
    V.A.T. included
    Consult
    PULSAR® RS485-TTL Interface [INTR]
    PULSAR® RS485-TTL Interface
    Ref.: INTR
    Intended use: The RS485-TTL ”INTR” interface enables connecting of the PSU of the PSBEN (Black Power) / EN54 (Red Power) series to the RS485 bus remaining galvanic isolation. The communication in the RS485 bus is due to a two-way channel, differential in a half-duplex system where transmitting and receiving data is alternate. Power supply: 5V DC (max.30mA). Transmission’s speed: Max. 115200 bauds, with parity check. Dimensions: 63 x 50 x 20 [mm]. Warranty: 5 years form the date of production. Works with the PowerSecurity programming software.
    V.A.T. included
    Consult
    PULSAR® SCB Serie 12 VDC/1.2Ah Battery (3-5 Years Lifespan) [SCB1.2-12]
    PULSAR® SCB Serie 12 VDC/1.2Ah Battery (3-5 Years Lifespan)
    Ref.: SCB1.2-12
    SCB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity: 1.2 Ah. Projected lifespan: 3 to 5 years at 20°C. Charging current: Recommended 0.12 Amp, Maximum 0.36 Amp. Dimensions: W = 98 , H = 59 , D = 44 [mm, +/-2].
    V.A.T. included
    Consult
    PULSAR® SCB Serie 12 VDC/2.3Ah Battery (3-5 Years Lifespan) [SCB2.3-12]
    PULSAR® SCB Serie 12 VDC/2.3Ah Battery (3-5 Years Lifespan)
    Ref.: SCB2.3-12
    SCB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity: 2.3 Ah. Projected lifespan: 3 to 5 years at 20°C. Charging current: Recommended 0.23 Amp, Maximum 0.69 Amp. Dimensions: W = 178 , H = 69 , D = 35 [mm, +/-2].
    V.A.T. included
    Consult
    PULSAR® SCB Serie 12 VDC/28Ah Battery (3-5 Years Lifespan) [SCB28-12]
    PULSAR® SCB Serie 12 VDC/28Ah Battery (3-5 Years Lifespan)
    Ref.: SCB28-12
    SCB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity: 28 Ah. Projected lifespan: 3 to 5 years at 20°C. Charging current: Recommended 2.8 Amp, Maximum 8.4 Amp. Dimensions: W = 166 , H = 173 , D = 126 [mm, +/-2].
    V.A.T. included
    Consult
    PULSAR® SCB Serie 12 VDC/4.5Ah Battery (3-5 Years Lifespan) [SCB4.5-12]
    PULSAR® SCB Serie 12 VDC/4.5Ah Battery (3-5 Years Lifespan)
    Ref.: SCB4.5-12
    SCB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity: 4.5 Ah. Projected lifespan: 3 to 5 years at 20°C. Charging current: Recommended 0.45 Amp, Maximum 1.35 Amp. Dimensions: W = 90 , H = 106 , D = 70 [mm, +/-2].
    V.A.T. included
    Consult
    PULSAR® SCB Serie 12 VDC/65Ah Battery (3-5 Years Lifespan) [SCB65-12]
    PULSAR® SCB Serie 12 VDC/65Ah Battery (3-5 Years Lifespan)
    Ref.: SCB65-12
    SCB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity: 65 Ah. Projected lifespan: 3 to 5 years at 20°C. Charging current: Recommended 6.5 Amp, Maximum 19.5 Amp. Dimensions: W = 349 , H = 178 , D = 167 [mm, +/-2].
    V.A.T. included
    Consult
    PULSAR® SCB Serie 18 Ah Battery (3-5 Years Lifespan) [SCB18-12]
    PULSAR® SCB Serie 18 Ah Battery (3-5 Years Lifespan)
    Ref.: SCB18-12
    SCB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity: 18 Ah. Projected lifespan: 3 to 5 years at 20ºC. Charging current: Recommended 1.8 Amp, Maximum 5.4 Amp. Dimensions: W = 182 , H = 168 , D = 77 [mm, +/-2].
    V.A.T. included
    Consult
    PULSAR® SCB Serie 18 Ah Battery (3-5 Years Lifespan) [SCB18-12]
    PULSAR® SCB Serie 18 Ah Battery (3-5 Years Lifespan)
    Ref.: SCB18-12
    SCB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity: 18 Ah. Projected lifespan: 3 to 5 years at 20ºC. Charging current: Recommended 1.8 Amp, Maximum 5.4 Amp. Dimensions: W = 182 , H = 168 , D = 77 [mm, +/-2].
    V.A.T. included
    Consult
    PULSAR® SCB Serie 40 Ah Battery (3-5 Years Lifespan) [SCB40-12]
    PULSAR® SCB Serie 40 Ah Battery (3-5 Years Lifespan)
    Ref.: SCB40-12
    SCB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity: 40 Ah. Projected lifespan: 3 to 5 years at 20°C. Charging current: Recommended 4 Amp, Maximum 12 Amp. Dimensions: W = 197 , H = 171 , D = 166 [mm, +/-2].
    V.A.T. included
    Consult
    PULSAR® SCB Serie 40 Ah Battery (3-5 Years Lifespan) [SCB40-12]
    PULSAR® SCB Serie 40 Ah Battery (3-5 Years Lifespan)
    Ref.: SCB40-12
    SCB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity: 40 Ah. Projected lifespan: 3 to 5 years at 20°C. Charging current: Recommended 4 Amp, Maximum 12 Amp. Dimensions: W = 197 , H = 171 , D = 166 [mm, +/-2].
    V.A.T. included
    Consult
    PULSAR® SCB Serie 7.0 Ah Battery (3-5 Years Lifespan) [SCB7-12]
    PULSAR® SCB Serie 7.0 Ah Battery (3-5 Years Lifespan)
    Ref.: SCB7-12
    SCB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity: 7 Ah. Projected lifespan: 3 to 5 years at 20°C. Charging current: Recommended 0.7 Amp, Maximum 2.1 Amp. Dimensions: W = 152 , H = 100 , D = 65 [mm, +/-2].
    V.A.T. included
    Consult
    PULSAR® Set for DIN Enclosures [PKAZ169]
    PULSAR® Set for DIN Enclosures
    Ref.: PKAZ169
    PKAZ169 set allows mounting modules and accessories intended for mounting on DIN rail inside enclosure. Set of screws is added to TH35 320mm rail (2 pcs. sheet metal screw 3.9x9.5 and 2 pcs. ICTrail brackets).
    V.A.T. included
    Consult
    PULSAR® Set of Optical Indication [PKAZ168]
    PULSAR® Set of Optical Indication
    Ref.: PKAZ168
    Destination: A set for optical indicationis designed for optical signaling in power supplies of PSB series (New version PSB-12V.../24V.../48V). Dimensions: 66 x 20 [+/-2 mm]. Set includes: module + 0,45m wire.
    V.A.T. included
    Consult
    PULSAR® SFP GBIC-101 Module (Single-Mode, 1.25G, Tx/Rx:1310, LC, 20KM, DDM) - TORNADO [GBIC-101]
    PULSAR® SFP GBIC-101 Module (Single-Mode, 1.25G, Tx/Rx:1310, LC, 20KM, DDM) - TORNADO
    Ref.: GBIC-101
    The SFP GBIC-101 module is designed to convert an electrical signal into an optical signal. It is designed for single mode fiber transmission (SM) using two optical fibers terminated with LC optical connectors. Fiber type: single mode (SM) – 8.3/125?m, 8.7/125?m, 9/125?m, 10/125?m. Transmission speed: 1,25Gb/s. Transmission range: up to 20km. Optical Connector Type: 2xLC. Wavelength Tx/Rx: 1310nm / 1310nm. Standards and protocols: IEEE 802.3z 1000Base-FX. Power supply: 3,3VDC (power from SFP port). Built-in DDM (Digital Diagnostics Monitoring). The module has a snap-lock system for optical connectors. Proper communication with other devices requires the use of the GBIC-101 module.
    V.A.T. included
    Consult
    PULSAR® SFP GBIC-102 Module (Multimode, 1.25G, Tx/Rx:1310, LC, 20KM, DDM) - TORNADO [GBIC-102]
    PULSAR® SFP GBIC-102 Module (Multimode, 1.25G, Tx/Rx:1310, LC, 20KM, DDM) - TORNADO
    Ref.: GBIC-102
    The SFP GBIC-102 module is designed to convert an electrical signal into an optical signal. It is dedicated for up multimode (MM) fiber transmission using two optical fibers terminated with LC optical connectors. Fiber type: multimode (MM) – 50/125?m, 62,5/125?m. Transmission speed: 1,25Gb/s. Transmission range: up to 2km. Optical Connector Type: 2xLC. Wavelength Tx/Rx: 1310nm / 1310nm. Standards and protocols: IEEE 802.3z 1000Base-FX. Power supply: 3,3VDC (power from SFP port). Built-in DDM (Digital Diagnostics Monitoring). The module has a snap-lock system for optical connectors. Proper communication with other devices requires the use of the GBIC-102 module.
    V.A.T. included
    Consult
    PULSAR® SFP GBIC-103 Module (Single-Mode, 1,25G, Tx:1310 / Rx:1550, SC, 20KM, DDM) - TORNADO [GBIC-103]
    PULSAR® SFP GBIC-103 Module (Single-Mode, 1,25G, Tx:1310 / Rx:1550, SC, 20KM, DDM) - TORNADO
    Ref.: GBIC-103
    The SFP GBIC-103 module is designed to convert an electrical signal into an optical signal. It is designed for single mode fiber transmission (SM) using one optical fiber terminated with an SC optical connector. Fiber type: single mode (SM) – 8.3/125?m, 8.7/125?m, 9/125?m, 10/125?m. Transmission speed: 1,25Gb/s. Transmission range: up to 20km. Optical Connector Type: 1xSC. Wavelength Tx/Rx: 1310nm / 1550nm. Standards and protocols: IEEE 802.3z 1000Base-FX. Power supply: 3,3VDC (power from SFP port). Built-in DDM (Digital Diagnostics Monitoring). The module has a snap-lock system for optical connectors. Proper communication with other devices requires the use of the GBIC-104 module.
    V.A.T. included
    Consult
    PULSAR® SFP GBIC-104 Module (Single-Mode, 1,25G, Tx:1550 / Rx:1310, SC, 20KM, DDM) - TORNADO [GBIC-104]
    PULSAR® SFP GBIC-104 Module (Single-Mode, 1,25G, Tx:1550 / Rx:1310, SC, 20KM, DDM) - TORNADO
    Ref.: GBIC-104
    The SFP GBIC-104 module is designed to convert an electrical signal into an optical signal. It is designed for single mode fiber transmission (SM) using one optical fiber terminated with an SC optical connector. Fiber type: single mode (SM) – 8.3/125?m, 8.7/125?m, 9/125?m, 10/125?m. Transmission speed: 1,25Gb/s. Transmission range: up to 20km. Optical Connector Type: 1xSC. Wavelength Tx/Rx: 1550nm / 1310nm. Standards and protocols: IEEE 802.3z 1000Base-FX. Power supply: 3,3VDC (power from SFP port). Built-in DDM (Digital Diagnostics Monitoring). The module has a snap-lock system for optical connectors. Proper communication with other devices requires the use of the GBIC-103 module.
    V.A.T. included
    Consult
    PULSAR® SFP GBIC-105 Module (Single-Mode, 1,25G, Tx:1310 / Rx:1550, LC, 20KM, DDM) - TORNADO [GBIC-105]
    PULSAR® SFP GBIC-105 Module (Single-Mode, 1,25G, Tx:1310 / Rx:1550, LC, 20KM, DDM) - TORNADO
    Ref.: GBIC-105
    The SFP GBIC-105 module is designed to convert an electrical signal into an optical signal. It is designed for single mode fiber transmission (SM) using one optical fiber terminated with an LC optical connector. Fiber type: single mode (SM) – 8.3/125?m, 8.7/125?m, 9/125?m, 10/125?m. Transmission speed: 1,25Gb/s. Transmission range: up to 20km. Optical Connector Type: 1xLC. Wavelength Tx/Rx: 1310nm / 1550nm. Standards and protocols: IEEE 802.3z 1000Base-FX. Power supply: 3,3VDC (power from SFP port). Built-in DDM (Digital Diagnostics Monitoring). The module has a snap-lock system for optical connectors. Proper communication with other devices requires the use of the GBIC-106 module.
    V.A.T. included
    Consult
    SYSAWAY© 2025 All rights reserved